1. SSC JE 2023 Notification

The SSC JE 2023 notification was released on 26 July 2023 with 1324 (tentative) vacancies . The SSC JE 2023 exam is held by the SSC to select qualified candidates for Junior Engineer positions in the Indian Government’s Ministries, Departments, and Contracting Agencies in the fields of Civil, Electrical, Mechanical, and Quantity Surveying. The positions fall under Group B (Non-Gazetted). Candidates who take the SSC JE test have the chance of a lifetime to realize their aspiration of working in the desired government jobs in their core sector of graduation. Candidates must frequently check the page to be informed of any updates regarding the SSC JE 2023 Exam. The Tentative date for SSC JE Paper-I is October 2023 and the board will issue the SSC JE 2023 Paper-II Exam Dates soon.

Check here for SSC JE 2023 Notification

2. About SSC JE 2023 Exam

The SSC JE 2023 Exam is conducted in two tiers: Paper I and Paper II. The SSC JE Notification 2023 is released with dates and updates of the JE (Junior Engineer) Paper-I Exam for 2023.

Candidates appearing for the post of JE (Civil), and JE (quantity surveying & contract) should attempt Part A (civil & structural) of papers I & II. On the other hand, candidates appearing for JE (electrical) need to attempt Part B (electrical) & the candidates appearing for JE (mechanical) need to attempt Part C (mechanical) of Paper I & II.

2.1 SSC JE 2023 Paper-I Exam

SSC JE 2023 Paper-I Exam is a Computer Based Test(CBT) with objective-type questions. This is an exam with a total of 200 marks tested mainly on reasoning, general awareness, and basics in the applicant’s engineering stream.

S.No.SubjectsMaximum MarksDuration
1General Awareness502 Hours
2General Intelligence and Reasoning50
3Part A- General Engineering (civil & structural)100
Part B- General Engineering (Electrical)
Part C- General Engineering (Mechanical)
Total2002 Hours

Each wrong answer carries a negative mark of 0.25. The answer key will be released on the official website after the completion of the official examination.

2.2 SSC JE 2023 Paper-II

SSC JE 2023 Paper II Exam is a conventional written test and purely technical exam tested for core knowledge in their respective stream of graduation. This exam mainly focuses on the applicant’s grip on technical knowledge. The candidate can attempt the exam in either Hindi or English . 

S.No.Subject (Only one as per Graduation)No of QuestionsMaximum MarksDuration
1Part A- General Engineering (civil & structural)1003002 Hours
2Part B- General Engineering (Electrical)
3Part C- General Engineering (Mechanical)
Total1003002 Hours


3. About IACE coaching for SSC JE

IACE is the best institute for SSC coaching. It has been providing coaching for SSC exams since 2014. It has a particular emphasis on the engineering syllabus and provides coaching in all the engineering streams for SSC JE coaching.

IACE coaching institute provides coaching for SSC JE with a thoroughly planned schedule designed particularly for the SSC JE syllabus. IACE provides coaching for both the Paper-1 and Paper-2 exams. IACE is one of the best coaching institutes for SSC JE. We place a lot of focus on the engineering curriculum for JE courses.

The institute is located in Hyderabad and has branches in Visakhapatnam and Vijayawada that are especially attuned to giving coaching in ‘junior engineer’ courses. Apart from this it also offers online coaching to students who are not able to visit the institute due to their busy schedules or geographical constraints.

4. SSC JE 2023 Exam Highlights

The SSC JE Notification 2023 is released on the official website of SSC. The Staff Selection Commission will conduct the exam for the recruitment of Junior Engineers (JE) in various Central Public Sector Enterprises (CPSEs). Candidates can check for more information about the notification below here or visit www.ssc.nic.in for the original notification.

Exam Conducting BodyStaff Selection Commission (SSC)
Exam NameSSC JE 2023
VacanciesTo be notified
Exam ModePaper I: Online Test

Paper II: Offline(Written) Test

Application ModeOnline
Selection Process
  1. SSC JE Paper 1 Exam
  2. SSC JE Paper 2 Exam
  3. SSC JE Document Verification
SalaryRs.35400/- to 112400/-
Job LocationAcross India
Official websitehttps://ssc.nic.in/


5. SSC JE 2023 Online Application & Fee

The SSC JE 2023 Online registration is a simple process if you follow the below steps, which include:

 5.1 Online Registration:

  • Candidate needs an SSC login account to apply for any SSC post.
  • Go to the official website https://ssc.nic.in/ and go for the login or register now link.
  • Fill in the basic details like name, gender, parent’s names and other details as per the matriculation document.
  • Candidate has to provide a functioning mobile number and email id which will be verified on submission. 
  • Then you have to log in with a new username and password to complete the final submission process.
  • Candidates are asked to fill in the details of education and other details like reservation, caste, benchmark disabilities, and if they are an ex-serviceman.
  • Candidate is asked to upload a scanned copy of a photo, sign, and id proof like an AAdhar card.
  • After checking everything and submitting to confirm the basic details, the candidate should select the SSC Exam, interested job, and finer details along with signing a declaration.
  • Then the candidate is forwarded to online payment options and final submission after completing the payment.

5.2 Payment of registration fee

SSC JE 2023 Exam is an online application process and the payment method is also online for the sake of easy accessibility for all the applicants. SSC JE 2023 Exam fee is a non-refundable amount of Rs.100/- for all applicants except a few reserved categories.

SSC JE 2023 Fee Details
1Women/SC/ST/PWD and Ex-servicemenNil.
2All other categoriesRs.100/-


6. SSC JE 2023 Eligibility Criteria

The eligibility criteria for the SSC JE Notification are as follows:

6.1 Educational qualifications: 

The Educational qualification required for the SSC JE 2023 Examination is either a graduation degree in the fields of Civil/Mechanical/Electrical or a diploma as tabulated below for each prospective post.

S.No.Organization Post Essential Educational Qualifications 
Border Roads Organization 


JE (C) Degree in Civil Engineering from a recognized  University/Institute; or 

(a) Three years Diploma in Civil Engineering  from a recognized University/Institute/Board;  and 

(b) Two years working experience in  Planning/Execution/Maintenance of Civil  Engineering works.

JE (E & M) Degree in Electrical or Mechanical Engineering from a recognized University/Institute; or 

(a) Three-year Diploma in  Electrical/Automobile/Mechanical Engineering

JE (E) Diploma in Electrical or Mechanical  Engineering from a recognized University or  Institute.
Central Water CommissionJE (C) Bachelor’s Degree or Diploma in Civil  Engineering from a recognized University or  Institution.
JE (M) Bachelor’s Degree or Diploma in Mechanical  Engineering from a recognized University or  Institution
Department of  Water Resources,  River  

Development &  Ganga  




JE (C) Three years Diploma in Civil Engineering from a recognized University or Institution.
5Farakka Barrage Project (FBP)JE (C) Diploma in Civil Engineering from a recognized  University or Institute or Board.
JE (M) Diploma in Mechanical Engineering from a  recognized University or Institute or Board.
6Military Engineer Services (MES)JE (C) Degree in Civil Engineering from a recognized  University; or 

(a) Three years Diploma in Civil Engineering  from a recognized Institute or University or  Board; and 

(b) Two years’ experience in Planning,  Execution and Maintenance of Civil  Engineering works.

JE (E & M) Degree in Electrical or Mechanical Engineering  from a recognized University; 


(a) Three years diploma in Electrical or Mechanical Engineering from a recognized  Institute or University or Board; and 

(b) Two years’ experience in Planning,  Execution and Maintenance of Electrical or  Mechanical Engineering Works

7Ministry of Ports, Shipping & Waterways  (Andaman 

Lakshadweep  Harbour 


JE (C) Diploma in Civil Engineering from a recognized  Institution.
JE (M) Diploma in Mechanical Engineering from a recognized Institution.





JE(C) Diploma in Civil Engineering from a recognized  University/Institution.
JE (E) Diploma in Electrical Engineering from a  recognized University/Institution.
JE (M) Diploma in Mechanical Engineering from a  recognized University/Institution.


6.2 Age limit

Candidates should be a graduate of engineering or diploma with less than 32 years and 30 years for some posts as below.

OrganizationPostAge Limit
Central Water CommissionJunior Engineer (Civil)Up to 32 years
Junior Engineer (Mechanical)Up to 32 years
Central Public Works Department (CPWD)Junior Engineer (Civil)Up to 32 years
Junior Engineer (Electrical)Up to 32 years
Military Engineer Services (MES)Junior Engineer (Civil)Up to 30 years
Junior Engineer (Electrical and Mechanical)Up to 30 years
Farakka Barrage ProjectJunior Engineer (Civil)Up to 30 years
Junior Engineer (Electrical)Up to 30 years
Junior Engineer (Mechanical)Up to 30 years
Border Road OrganizationJunior Engineer (Civil)Up to 30 years
Junior Engineer (Electrical & Mechanical)Up to 30 years
Central Water and Power Research StationJunior Engineer (Civil)Up to 30 years
Junior Engineer (Electrical)Up to 30 years
Junior Engineer (Mechanical)Up to 30 years
Ministry of Ports, Shipping & Waterways  (Andaman Lakshadweep Harbour Works)Junior Engineer (Mechanical)Up to 30 years
Junior Engineer  (Civil)Up to 30 years
National Technical Research Organization (NTRO)Junior Engineer (Civil)Up to 30 years
Junior Engineer (Electrical)Up to 30 years
Junior Engineer (Mechanical)Up to 30 years


6.3 Age relaxation

S.No.CategoryAge Limit Relaxation
1SC/ST5 years
2OBC3 years
3Persons with Disabilities (PwD)10 years
4PwD + OBC13 years
5PwD + SC/ ST15 years
6Ex-Servicemen (ESM)3-years after deduction of the military service rendered from the actual age
7Defence Personnel disabled & discharged due to hostile action in foreign countries3 years
8Defence Personnel disabled & discharged due to hostile action in foreign countries(SC/ST)8 years


6.4 Nationality

Candidates applying for the SSC JE 2023 should be of Indian nationality if not they need a document certifying the eligibility to apply for the SSC JE Exam. Applicants are not prevented from attempting the exam but there will be a thorough verification during the document verification round.

Candidates not of Indian origin can apply for an eligibility certificate if they are:

  • A subject of Nepal or Bhutan
  • A Tibetan refugee before 01/01/1962
  • People migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the 4 United Republic of Tanzania (formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam to settle permanently in India.

7. SSC JE 2023- Important Dates

The SSC JE 2023 Notification is out and updated. The important dates will be tabulated below. Stay alert and don’t miss any of these important dates.

SSC JE 2023 Important Dates
SSC JE 2023 Notification Release Date26-07-2023
SSC JE 2023 Application Starts26-07-2023
SSC JE 2023 Last Day to Apply16-08-2023
SSC JE 2023 Application Correction  Date17.-08-2023 & 18-08-2023
SSC JE Paper-I Admit Card 2023To be notified
SSC JE 2023  Paper-I Exam date9,10& 11 October,2023
SSC JE Answer Key 2023To be notified
SSC JE Paper-I Result and Cut-OffTo be notified
SSC JE Paper-II Admit CardTo be notified
SSC JE 2023  Paper-II Exam dateTo be notified
SSC JE 2023  Final Results To be notified

8. SSC JE Selection Procedure

The SSC JE 2023 Selection Procedure is a 3-stage process that includes Online Exam, and document verification. Other than these three There is a physical efficiency Test for Group ‘B’ Non-Gazetted posts

  • Online Exam:  The first level of the selection process is an objective type computer-based test. This Online Exam has Paper I and Paper II and Candidates have to score minimum qualifying marks including a sectional cutoff there is a 0.25 mark as a penalty for every wrong answer. Each paper mark is taken into consideration for preparing the merit list. Qualifying this will allow the candidate to proceed to the next step. The language of the question paper will be in Hindi and English only.
  • Document Verification: this is a very strict process that verifies all documents regarding
    1. Education, 
    2. Nationality, 
    3. Caste
    4. PWD(if applicable)
    5. Ex-servicemen(If applicable)
    6. Medical health certificate
  • Physical efficiency test and Medical test: After the final selection the Medical test is conducted for the shortlisted candidates. Physical efficiency test is conducted for  One-mile run: This is a mandatory fitness test, to run a mile in 10 minutes if no disabilities are mentioned previously.

9. SSC JE Syllabus 2023

9.1 SSC JE Paper I Syllabus

1. General Intelligence & Reasoning
Analogies, Differences, Similarities, Problem-Solving, Judgment, Decision Making, Discrimination, Arithmetical Reasoning, Space Visualization, Analysis, Visual Memory, Observation, Relationship Concepts, Verbal And Figure Classification, Arithmetical Number Series, Etc. The Test is  Designed To challenge The Candidate’s Abilities To Deal With Abstract Ideas And Symbols And Their Relationships, Arithmetical Computations and Other Analytical Functions.
2. General Awareness
General awareness of the Environment around oneself, Knowledge of current events and of such matters of everyday observations, Scientific aspects and their applications on every day, Questions relating to India and its neighboring countries especially pertaining to History, Geography, Culture, General Polity, Economic Scene and Scientific Research, etc
3a. Civil Engineering
Building Materials, Costing and Valuation, Soil Mechanics, Irrigation Engineering, Transportation Engineering, Estimating, Surveying, Hydraulics, and Environmental Engineering.

Structural Engineering: Theory of Structures, RCC Design, Concrete Technology, and Steel Design.

3b. Electrical Engineering
Basic concepts, Magnetic Circuit, Circuit law, Measurement and Measuring instruments, AC Fundamentals, Fractional Kilowatt Motors and single phase induction Motors, Basic Electronics, Electrical Machines, Estimation and Costing, Synchronous Machines, Generation, Transmission and Distribution, Utilization and Electrical Energy.
3c. Mechanical Engineering
Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Nozzles & Steam Turbines, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Refrigeration cycles, Principle of Refrigeration Plant. Properties & Classification of Fluids, Fluid Statics, Fluid kinematics, Measurement of Fluid Pressure, Centrifugal Pumps, Classification of steel, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines.


9.2 SSC JE 2023 Paper II Syllabus

Civil Engineering
Building Materials: Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. silicate-based materials, building stones, timber and wood-based products, cement (Portland), asbestos products, laminates, varnishes, bituminous materials, paints. 

Estimating, Costing and Valuation: estimate, glossary of technical 18 terms, analysis of rates, Items of work – earthwork, Brick work (Modular & Traditional bricks), methods and unit of measurement, RCC work, Timber work, Boundary wall, Shuttering, Flooring, Painting, Plastering, Water Tank, Brick building, Septic tank, Cost estimate of Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Steel Truss, Piles and pile-caps, Trapezodial formula, Simpson’s rule, flexible pavements, Tube well, isolates and combined footings,. Valuation – Value and cost, scrap value, salvage value, depreciation and obsolescence, sinking fund,  assessed value, methods of valuation. 

Surveying: Principles of surveying, measurement of distance, chain surveying, working of the prismatic compass,  local attraction, compass traversing, bearings, plane table surveying, theodolite traversing, Levelling, adjustment of theodolite,  curvature and refraction corrections, Definition of terms used in leveling, contouring, temporary and permanent adjustments of dumpy level, advanced surveying equipment, methods of contouring, uses of a contour map, tachometric survey, curve setting, earth work calculation.

Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, the specific gravity of soil grains, water content, unit weights, density index and interrelationship of different parameters, Atterberg‟s limits, ISI soil classification and plasticity chart Permeability of soil, Grain size distribution curves and their uses Index properties of soils, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, consolidation of soils, effective stress, quick sand, Principles of consolidation, degree of consolidation, standard penetration test, pre-consolidation pressure, normally consolidated soil, elog p curve, computation of ultimate settlement Shear strength of soils, direct shear test, Vane shear test, Triaxial test Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories,  Bearing capacity of soils,  plate load test, active and passive earth pressures.

Hydraulics: Fluid properties, measurements of flow, hydrostatics, Bernoulli’s theorem and its application, flow in open channels, flow through pipes, weirs, flumes, pumps and turbines, spillways.

Irrigation Engineering: Definition,  benefits, necessity, 2II effects of irrigation, Hydrology – Measurement of rainfall, types and methods of irrigation, runoff coefficient, rain gauge, Water requirement of crops, losses from precipitation – evaporation, infiltration, etc, duty, delta and base period, Kharif and Rabi Crops, Time factor, Command area, Crop ratio, Overlap allowance, types of canal irrigation, Irrigation efficiencies Different type of canals, loss of water in canals Canal lining – types and advantages Shallow and deep to wells, Failure of weirs and permeable foundation, yield from a well Weir and barrage, Slit and Scour, water logging, Kennedy’s theory of critical velocity Lacey’s theory of uniform flow Definition of flood, causes and effects, preventive measure Land reclamation, methods of flood control, description of land and reclamation 19 processes Major irrigation projects in India, Characteristics of affecting fertility of soils, purposes, methods.

Transportation Engineering: Highway Engineering – cross-sectional elements, geometric design, pavement materials – aggregates and bitumen, types of pavements, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), different tests, Gravel Road, Rigid pavement joint, Bituminous construction, pavement maintenance, Railway Engineering, Components of permanent way – sleepers, Highway drainage, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards Traffic Engineering – Different traffic survey,  intersections and interchanges, speed-flow-density and their interrelationships, traffic operation, traffic signals, road safety, traffic signs and markings.

Environmental Engineering: source of water supply,  Quality of water, purification of water, distribution of water, need of sanitation, sewerage systems, oval sewer, circular sewer, sewer appurtenances, sewage treatments Surface water drainage Solid waste management – types, effects, engineered management system Air pollution – causes, effects, pollutants,control Noise pollution – cause, health effects, control 

Structural Engineering: Theory of structures: Elasticity constants, types of beams – indeterminate and determinate, bending moment and shear force diagrams of simply supported, Moment of area and moment of inertia for rectangular & circular sections, cantilever and over hanging beams, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, slope deflection of simply supported and cantilever beams, eccentric loads, Torsion of circular section, critical load and columns.

Concrete Technology: Advantages and uses of concrete, Properties, cement aggregates,  water cement ratio, the importance of water quality, workability, finishing and curing of concrete, mix design, batching, storage, mixing, placement, compaction, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.  

RCC Design: Cantilever beams T-beams, design of singly reinforced and double reinforced beams, RCC beams-flexural strength, shear strength, bond strength, isolated footings Reinforced brick works, water tanks,  columns, staircases, retaining wall, lintels One way and two-way slabs.

Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders

Electrical Engineering
Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them Concepts of current, voltage, power, energy and their units 20

Circuit law: Simple Circuit solution using network theorems, Kirchhoff’s law, etc.

Magnetic Circuit: Concepts of flux,reluctance, mmf,  Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc Electromagnetic induction, Mutual and Self induction

AC Fundamentals: RMS, peak, Instantaneous and average values of AC waves, Representation of sinusoidal wave form, Tank Circuit Poly Phase system – star and delta connection, simple series and parallel AC Circuits consisting of RL and C, Resonance, 3 phase power, DC and sinusoidal response of R-Land R-Ccircuit 

Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, Energy meter AC Bridges Use of CRO, 2 wattmeter method of 3 phase power measurement, extension of range wattmeter, Measurement of frequency and phase angle Ammeter and voltmeter (both moving oil and moving iron type), Multimeters, Megger, Signal Generator, CT, PT and their uses Earth Fault detection 

Electrical Machines: (a) DC Machine – Construction, Basic Principles of DC motors and generators, their characteristics, speed control and starting of DC Motors Method of braking motor, Losses and efficiency of DC Machines (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, effect of voltage and frequency variation on torque speed characteristics Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications, voltage regulation, OC and SC Tests, Losses and efficiency Effect of voltage, frequency and wave form on losses Parallel operation of 1 phase /3 phase transformers Auto transformers (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors Methods of braking.

Synchronous Machines: Generation of 3-phase emf armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power Starting and applications of synchronous motors 

Generation, Transmission and Distribution: Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, various types of tariffs, inter-connection of power stations Power factor improvement, types of faults, Principles of arc extinction by oil and air, HRC Fuses, short circuit current for symmetrical faults Switchgears – rating of circuit breakers, Protection against earth leakage / over current, etc Merz-Price system of protection of generators & transformers, Buchholtz relay, protection of feeders and bus bars Lightning arresters, comparison of conductor materials, efficiency of different system Cable – Different type of cables, cable rating and derating factor 21, various transmission and distribution system.

Estimation and costing: Estimation of lighting scheme, electric installation of machines and relevant IE rules Earthing practices and IE Rules 

Utilization of Electrical Energy: Electric welding,  Electric heating, Illumination, Electric drives, Electroplating, and motors 

Basic Electronics: Working of various electronic devices e.g. P N Junction diodes, Transistors (PNP and NPN type), BJT and JFET Simple circuits using these devices

Mechanical Engineering
Theory of Machines and Machine Design: Concept of a simple machine, Four bar linkage and link motion,, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots, Gears – Type of gears, gear profile and gear ratio calculation, Flywheels and fluctuation of energy.

Engineering Mechanics and Strength of Materials: Equilibrium of Forces, Friction, Law of motion, Concepts of stress and strain, Bending moments and shear force diagram, Stress in composite bars, Bucking of columns–Euler’s and Rankin’s theories, Torsion of circular shafts, Thin walled pressure vessels, Elastic limit and elastic constants.

Thermal Engineering: Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC engines, Rankine cycle of steam.

Fluid Mechanics & Machinery: Properties & Classification of Fluid, Fluid Statics, Measurement of Fluid Pressure, Fluid Kinematics, Dynamics of ideal fluids, Measurement of Flow rate Basic Principles, Hydraulic Turbines, Centrifugal Pumps, Performance Production Engineering, Classification of Steels.


10. SSC JE Vacancy 2023

SSC JE 2023 notification was released on 26 July 2023.  SSC has released a total of 1324 (Tentative) vacancies for SSC JE. The detailed category-wise vacancy list of SSC JE 2023 is mentioned below. 

Name of Dept. Post SC ST OBC EWS UR Total OH HH Others
Border Roads  OrganizationJE(C) 65 32 116 43 175 431 0
(For Male candidates only)
Border Roads  Organization  (For Male candidates only)JE (E & M)15 22 55 0
Central Public  Works  DepartmentJE(C) 78 35 82 32 194 421 5
Central Public  Works  DepartmentJE(E) 15 10 15 10 74 124 1
Central Water  CommissionJE(C) 24 10 34 21 99 188 4
Central Water  CommissionJE(M) 13 23 1
Department of  Water  Resources,  River  

Development  & Ganga  Rejuvenation (Brahmaputra  Board)

JE (C) Vacancies to be intimated in due course.
Farakka  Barrage  ProjectJE (C) 15 0
Farakka  Barrage  ProjectJE(M) 0
Military  Engineer  ServicesJE (C) 12 29 0
Military  Engineer  ServicesJE (E & M)18 0
Ministry of  Ports,  Shipping &  Waterways  

(Andaman  Lakshadweep Harbour  Works)

JE (C) 0
Ministry of  Ports,  Shipping &  Waterways  

(Andaman  Lakshadweep  Harbour  Works)

JE(M) 0
National  Technical  Research  


JE(C) 0
National Technical  Research  


JE (E) 0
National  Technical  Research  


JE(M) 0
Total 206 96 288 121 613 1324 11

11. SSC JE Cut-Off: Previous Year’s Cut-off Marks

SSC JE 2023 Cut-off is released with SSC JE 2023 exam results. Please follow this blog for SSC JE 2023 Cut-off latest updates. Meanwhile, for reference purposes, SSC JE 2022 Paper I Cut-off is given below.

SSC JE 2023 Minimum qualifying marks for Paper-I and Paper-II:

SSC JE 2023 Minimum qualifying marks Category-wise
CategoryCut-off Marks
All other category20%


SSC JE 2022 Cut-Off (Civil)
CategoryCut-off Marks
Others PwD40.00000


SSC JE 2022 Cut-Off (Electrical/Mechanical)
CategoryCutoff Marks
Others PwD40.00000

12. SSC JE 2023 Salary Structure

SSC JE Jobs give Junior engineer cader in government ministries/departments with Level-6 (Base pay: Rs 35400-53,514/-), of the 7th Central Pay Commission’s pay structure.

SSC JE Salary structure
Basic Pay(Starting)35,400
Grade Pay4200
HRA24% – X city, 16% – Y city, 8% – Z city 
Dearness Allowance17%
Travelling Allowance3600 to 1800
Gross total(Rs 35,400-1,12,400/-)

13. SSC JE 2023 Exam Centre

S.No.Region/State/UTExam centers
1Central Region (CR)/ Bihar and Uttar Pradesh Bhagalpur, Muzaffarpur, Darbhanga, Purnea, Patna, Agra, Gorakhpur, Bareilly, Jhansi, Varanasi, Kanpur, Lucknow, Prayagraj, Meerut.
2Eastern Region (ER)/ Sikkim, Odisha, Andaman & Nicobar Islands, Jharkhand and West BengalPort Blair, Hazaribagh, Ranchi, Behrampur-Ganjam, Dhanbad, Sambalpur, Jamshedpur, Balasore, Durgapur, Bhubaneshwar, Cuttack, Kalyani, Rourkela,  Siliguri, Gangtok, Asansol, Kolkata, Burdwan.
3Karnataka, Kerala Region (KKR)/ Lakshadweep, Kerala and Karnataka. Belagavi, Hubballi, Bengaluru, Mysuru, Kalaburagi (Gulbarga), Mangaluru, Shivamogga, Udupi, Thrissur, Ernakulam, Kannur, Kollam, Kozhikode, Kottayam, Thiruvananthapuram.
4Madhya Pradesh Region (MPR)/  Madhya Pradesh and ChhattisgarhBhilai Nagar,  Raipur, Bilaspur, Bhopal, Gwalior, Satna, Jabalpur,  Ujjain, Indore.
5North Eastern Region (NER)/ Manipur, Arunachal Pradesh, Assam,  Meghalaya, Tripura, Nagaland and Mizoram.Guwahati (Dispur), Itanagar, Jorhat,  Dibrugarh,  Agartala, Silchar, Tejpur, Aizwal, Imphal, Shillong,  Kohima.
6Northern Region (NR)/ Delhi, Uttarakhand and Rajasthan Delhi NCR, Bharatpur,  Ajmer, Jaipur, Bikaner,  Jodhpur, Sikar, Udaipur, Roorkee, Dehradun, Haldwani.
7North Western Region (NWR)/ Chandigarh, Himachal Pradesh, Haryana, Punjab, Jammu and Kashmir, and Ladakh Jammu, Shimla, Chandigarh, Hamirpur, Leh, Samba,  Patiala, Amritsar, Srinagar (J&K),  Jalandhar.
8Southern Region (SR)/ Andhra Pradesh, Tamil Nadu, Telangana, and Puducherry.Kakinada, Nellore, Warangal, Chirala, Guntur,  Kurnool, Rajahmundry, Tirupati, Vijaywada,  Vizianagaram, Puducherry, Chennai, Vishakhapatnam, Coimbatore, Madurai, Salem, Tiruchirapalli, Tirunelveli, Hyderabad, Karimnagar, Vellore.
9Western Region (WR)/ Dadra and Nagar Haveli, Maharashtra and Daman and Diu, Goa, and Gujarat  Mumbai, Vadodara, Panaji, Gandhinagar, Ahmedabad, Anand, Amravati, Mehsana, Rajkot, Surat, Aurangabad, Jalgaon, Kolhapur,  Nagpur, Pune, Nanded.

14. SSC JE Preparation Tips 2023

The SSC JE Exam 2023 is a prestigious examination and the necessary step to succeed in your dream of a government job in the core sector. The exam is held every year in three stages – Paper-I, Paper-II and Document verification. Paper-I is an objective type and Paper-II is a descriptive test, while the Document verification stage is face to face interview round.

There are two ways to prepare for the SSC JE: One way would be to go through Previous years’ SSC JE question papers to get an idea about what kind of questions are asked in the exam. Another way would be to read up on topics from all sections like history, geography, economics or science that might come up

 Few tips for preparing for the SSC JE 2023 Examination.

  • Firstly, you should analyze the syllabus in detail and identify what is important for the examination.
  • Secondly, it is important to do daily practice & mock tests.
  • Thirdly, revise the mock tests and keep on repeating them until you are confident about your performance.
  • Fourthly, it is important to maintain a healthy lifestyle and get adequate sleep while preparing for the exam.

15. SSC JE 2023 Admit Card & Call Letter

The SSC JE 2023 Admit Card and Call Letter are available to download on the website of the SSC. Candidates must download their admit card before the exam to attend it. 

  •  The Admit cards for SSC JE Paper I will be uploaded on the official website of SSC a few days before the exam for all the candidates registered online.
  •  The Admit card for SSC JE Paper II is only available for people that qualified for SSC JE Paper I Exam and are shortlisted.

The Call letter for document verification is sent to people who qualify for SSC JE Paper II Exam.

16. SSC JE Paper I 2023 Results

The SSC JE 2023 Paper I results will be out after the completion of the 2023 SSC JE Paper I exam. The results will be available as soon as announced by the SSC board online. The link for the results will be updated in this blog. Students are suggested to check the blog regularly.

17. SSC JE Paper II 2023 Results

SSC JE 2023 Paper II results will be released by the board of SSC on the official website. The results will be out after 1 month of exams. Candidates are advised to follow this page and check here for the fastest updates. The link will be updated below when the results are released.

18. SSC JE 2023 Document Verification

The SSC JE 2023 Interview is strictly for document verification, fitness check, and a review of your capabilities to work with a team in an organization. The attendant must bring with them the following documents for verification

  1. Call letter for document verification
  2. Id proof(Aadhar, voter Id, passport, driving license, etc
  3. Documents of Education(10,10+2, Graduation, PG) as mentioned during registration.
  4. Caste/Category certificate (if applicable)
  5. PWBD Certificate (if applicable)
  6. Discharge Certificate for Ex-servicemen
  7. Any certificate supporting age relaxation (if applicable)

19. FAQ's

1. What is the age limit to apply for SSC JE 2023 Exam?

Ans. Applicant should be less than 30 years of age for the exam and 32 years of age for some specific posts. Age relaxation policy may apply as per reservation.

2. What are the eligibility criteria for applying to SSC JE-Exam?

Ans. A candidate must have completed a Diploma or a bachelor’s degree in any engineering course (Civil/Electrical/Mechanical), be a citizen of India and should not be more than 32 years of age.

3. When is the SSC JE Exam 2023 notification released?

Ans.  Staff Selection Commission Junior Engineer  ( SSC JE ) 2023 Exam notification was released on 26-7-2023. Students can submit their Online application form.

4. Is there any negative marking in the SSC JE exam?

Ans. Yes, 0.25 mark is deducted for every wrong answer.

5. What are the exam duration and total marks in the SSC JE Exam?

Ans. SSC JE 2023 Paper-I contains 200 questions for 2 hours duration and Paper-II contains 100 questions for 2 hours duration.

6. How many number of vacancies are there in the SSC JE 2023 notification?

Ans. 1324 is the total tentative number of vacancies in the SSC JE 2023 notification and the final number of will be increased.

How can we help you?

Get Call Back!